Sea-Klear Spa System Flush

Sea-Klear Spa System Flush

$17.50

Deep Cleans Without Harsh Chemicals

Spa System Flush from Sea-Klear is the perfect way to get rid of all of that crud, oil, slime, lotions, bio-film and chemical deposits etc…that accumulate inside the pipes, heater and circulation system of your spa, hot tub or jetted bath system.

Spa System Flush is an eco-friendly formula and contains no soaps, detergents or alcohol. It’s extremely cost effective and only takes 8 oz. per 400 gallons of water to completely flush your pipes, so you’ll get a minimum of two system flushes per 16 oz. bottle.

Once You’ve Tried Spa System Flush, You’ll Swear By It!

SKU: spasysf. Categories: , ,

Product Description

Sea-Klear Spa System Flush

Sea-Klear Spa System Flush Spa System Flush from Sea-Klear is the perfect way to get rid of all of that crud, oil, slime, lotions, bio-film and chemical deposits etc…that accumulate inside the pipes, heater and circulation system of your spa, hot tub or jetted bath system.

The pipes and hoses are the heart of your hot tub or spa and your system doesn’t perform the way it should without proper maintenance.

Spa System Flush removes all of the film crude, oil and mineral deposits without the use of harsh or toxic chemicals.

A spa with a spotless plumbing system results in cleaner, clearer, fresher and healthier water as well as an improved hot tub or spa experience.

Eco-Friendly Formula – Spa System Flush contains no soaps, detergents or alcohol and it’s extremely cost effective! It only takes 8 oz. per 400 gallons of water with each hot tub or spa refill to completely flush your pipes, so you’ll get a minimum of two systems flushes per 16 oz. bottle.

Easy to Use & Economical – When it’s time to drain your hot tub or spa water, just add 8 oz. of Spa System Flush to your old water and run your pump and/or jets on high for approximately 10-15 minutes. Reduce the pump speed to low and continue to run the pump or jets overnight.

Then all you do is drain the old hot tub water, along with the residue left over from your pipes being flushed, and refill your hot tub or spa. You’ll be amazed at how much clearer your water is.

Directions for Use:

1. Remove filters and adjust water level if necessary
2. Add 2 oz for every 100 gallons of Spa System Flush directly to old spa water
3. Run spa w/jets on high speed using all jets & water features for a minimum of 15 minutes
4. Drop jet speed to low or put in circulation mode overnight
5. Drain spa or hot tub and clean shell
6. Reinstall cleaned filters, refill and balance water

16 oz. Bottle @ $17.50

Once You’ve Tried Spa System Flush, You’ll Swear By It!

Reviews

There are no reviews yet.

Be the first to review “Sea-Klear Spa System Flush”

Your email address will not be published. Required fields are marked *